Durable C Purlin Forming Machine Single Station 3T High Frequency
Technical parameters
| Uncoiler (manual/automatic) | Weight Capacity | 3T |
| Inner Diameter | 460-520mm |
| Outside Diameter | 1400mm |
| Coil width | Max 600mm |
| Feeding and straightening device | Pinch rollers | one pair, up and down |
| Straightening rollers | up three, down four |
| Diameter of rollers | 75mm |
| Roll Former | Frame type | single station |
| Forming Roller stand | about 14 Groups |
| Shaft material | First grade 45# steel, |
| Shaft diameter | 75mm |
| Roller material | GCr15 |
| Drive Type | Chain of transmission |
| Motor | 15KW reducer with frequency control |
| Roll stand type | split type, two sides forming separately |
| Size changing time | 15 min |
| Automatic size changed by slide screw and angle gear which guarantee the complete synchronization and the material thickness is adjusted by eccentric distance of passive rollers. |
| Punching | Type | Hydraulic |
| Mould material | Cr12 |
| Holes distance | Can be adjusted |
| Cutting 1 Hydraulic cutter | Type | After-cutting, hydraulic |
| Material of mould | Cr12 |
| Cutting tolerance | 10M+/- 2.0 mm |
| Cutting 2 Fly saw | option |
| PLC cabinet | PLC | PANASONIC |
| Length Controller | Encoder |
| Operation | Touch Screen |
| Transducer | Mitsubishi |
| Hydraulic station | Power | 7.5 KW |
| Hydraulic pressure | 11 Mpa |
| Runout Table | Non-power type | |
C profile/shape
Used for
