Custom Metal Roof Roll Forming Machine With 10 - 12m / Min Forming Speed

Custom Metal Roof Roll Forming Machine With 10 - 12m / Min Forming Speed

Quick Details

• Place of Origin: China
• Brand Name: Wuxi Shenghong
• Certification: CE

Specifications

Our company is a professional supplier in the field of steel structure construction, especially good at making forming machine.

Model SWL151218-55 forming machine consists of uncoiler and its base, coil sheet
guiding equipment, film covered device, roll forming system, post-cutting equipment,
hydraulic station, controlling system, supporter table.

Technical parameters:
1) Material spec: colored steel sheet; galvanized steel sheet
2) Thickness of coil sheet: 0.3 - 0.7 mm
3) Main motor power: 7.5kW
4) Forming speed: 10 - 12m/min
5) Hydraulic station power: 3kW
6) Quantity of stands: about 18 groups
7) Hydraulic pressure: 10 - 12MPa
8) Controlling system: PLC
9) Index error of length: 10m±2mm
10) Total weight: about 1,000kg
11) Voltage: 380V 3 phase 60Hz or at buyer's requirement

Material of main equipment
1) Roller material: high grade no. 45 forged steel, plated hard chrome on the surface
of roller with thickness 0.05mm
2) Active shaft material: high grade No.45 carbon wrought steel at diameter 75mm
3) Cutter blade: Cr12 mould steel with quenched treatment
4) Electric elements: control system with PLC model S7-200, Siemens transducer with
ABB control panel with TP170, Siemens. It can input 10 sets of spec at one time

5) Oil tank model of hydraulic system: CB-E310

Cold Rolling Mills introduction

1. Feeding section with guide;
2. Gear/Sprocket driving;23-step to form
3. Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated
4. Shafts Diameter=75mm, Precision Machined
5. Main motor =7.5 KW, Frequency speed control
6. Forming speed:Approx. 15m/min;
7. Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside

Hydraulic Cutting Device

1. Stop to cut, Post cut, No Blanking cut
2. Pump motor =4.0KW
3. Cutting tool material : Cr12, Heat treatment;

PLC Control System

1. Control the quantity & cutting length automatically;
2. Combined with: PLC, Touch Screen (SIEMENS), Inverter (SCHNEIDER), Encoder (Omron), etc
3. Cut-to-length tolerance≤±2 mm
4. Control Voltage 24V
5. Product Rack Un-powered, 3 units

Machine Shows

Final Products Showroom