Jiangyin Dingbo Technology Co., Ltd
Jiangyin Dingbo Technology Co.Ltd. Professional in manufacturing roll forming machine
Add to Cart
2.5-5mm Thickness C U Post Roll Forming Machine Casting Iron C Section Roll Forming Machine
Product Descriptions
C Post Roll Forming Machine and U Post Roll Forming Machine are support machines of Highway Guardrail Roll Forming Machine. This C/U Post Roll Forming Machine can produce the C Post for Highway Guardrail and U Post for Highway Guardrail in one machine or by cassette with quick change save cost and time, which is good for reducing the clients’ investment. C/U Post can be used as the support for two waves or three waves highway guardrail .
The U Channel Roll Forming Machine is technically capable of producing steel purlins of 2 to 3mm (common thickness), sometimes 5mm for special applications.For most U purlins, punching can be used.Purlin raw material can be steel coil, chrome plating coil, etc.
Our machine can produce U purlin of different sizes 80mm-300mm (standard) by replacing the roller gasket.
In the steel industry, different purlin structural shapes were given representative names to facilitate the easy description of drawings and documents.Channel sections, with or without flange stiffeners, are usually referenced as C purlin;The channel section without flange stiffeners is also called U purlin.Point symmetry with a shape similar to the letter Z is called a Z purlin.
C purlins are generally used for roofing and wall surfaces. Since the roof requires wind snow load, it is best to use a continuous beam structure. While C purlin can only form a simple support instead of continuous beam structure due to overlapping failure. That’s why C purlins are main used as wall purlins while Z purlins are mainly used for roof purlins.
Product Parameters
| Main motor power | 15kw |
| Drive | Chain |
| Main shaft diam | 76mm( material: 45#forge steel and quenched ) |
| Roller material | Gcr15 bearing steel forge steel and quench treatment hardness 58-62, chrome coated 0.05mm |
| Roll station | 12 groups |
| Raw material | 0.8~2.0mm |
| Width of purlin | 100~500mm adjustable |
| Working speed | 10m--15m/min(Exclude cutting time) |
| Length Tolerance | ±1mm |
| Weight of machine | about 6ton |
| Size of machine | About 9000×1000×1500mm L x W x H |
| Color of machine | depend on customer |
| Coder | Omron |
| Control | PLC Panasonic, made in Japan. 380V 50HZ |
| Computer operating panel | touching screen |
| Punching | Hydraulic punching before roll forming |
| Cutting | Hydraulic cutting after roll forming( Cutting when reach the set length ) |
| Hydraulic power | 5.5KW |
| Blade material | Cr12,quenched 58°-62° |
| Working pressure | 20mpa |
| Cutting tolerance | +/- 1.5mm |
Version to design
Working Flow
Main Components
| No. | Name | Qty |
| 1 | Manual Decoiler | 1 |
| 2 | Punching part | 1 |
| 3 | Main roll forming machine | 1 |
| 4 | PLC Control box | 1 |
| 5 | Hydraulic station | 1 |
| 6 | Output table | 1 |
Application Pictures
FAQ
1. Q: What's the warranty period? (24hours online)
12 months warranty period, starting from the date of the successful installation and commissioning of the equipment at the Buyer’s Installation site. During which all parts damaged because of quality problem will be changed for free.
2. Q: Do you have installation and commissioning service
A.If buyers come to our factory to inspect, the training to install and operate is provided face to face. If not, manual and video is provided to show how to install and operate.
B. If buyer need we will send technician to buyer site to do installation and commissioning and training.
C.installation and commissioning cost: One engineer will visit Buyer’s workshop for installing, commission and training. The buyer has to pay USD100/per day and visa fee, air tickets fee, accommodation and food, necessary communication, etc.
(Normally ,It takes about a week to install )
3. Q: What’s your after-sales service ?
We provide 24-hour online service for our customers.
And we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
4. Q: What's your delivery time ?
Normally we can finish production and testing within 45-70 days after receiving deposit. Some machines in stock, can be delivered at any time
5. Q: You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
6. Q: Do you provide customized machine?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
7. Q: How to place order ?
Inquiry---confirm the profile drawings and technical specification and price----confirm the PI---arrange the deposit or L/C---start production-- do inspection--- Shipment
8.What are your terms of payment ?
First payment: 30 % by T/T, second payment: 70% by T/T, after the successful inspection at seller’s workshop, and before delivery.