Servo cutting high-speed Strut and Track Roll Forming Machine
Product Descriptions
Stud and track roll forming machine production is a new kind of building materials, with the development of modernization construction in our country, light steel keel forming machine in the production of light steel keel is widely used in hotels, terminal, transport station, station, car playground, shopping malls, factories, office buildings, old building renovation, interior decoration, ceiling and so on.
Version to design
Working Flow
Decoiler -- Feeding -- Straighten -- Punching --Roll forming -- Shear -- Output
Product Parameters
| | Items | Specifications |
| Material of coil | Thickness | 0.3-1mm galvanized steel |
| De-coiler | Weight | 3 ton manual |
| Forming system | Rolling Speed | 0-15m/min 15-45m/min (Depending on the customer) |
| Embossing | At sides |
| Roller Stations | About 13 stations forming |
| Roller Material | Cr40 Steel with quenching |
| Shaft Material | 45# Steel Diameter 60mm shaft |
| Motor Power | 5.5 kw |
| Hydraulic cutting Power | 3 kw |
| Cutting system | Material of cutting | CR12 with quench treatment |
| Hardness | HRC58-62 |
| Tolerance | +-1.0 mm |
| Cutting blade | 3 pieces of cutting blade |
| Electrical control system | Electric Source | 380V, 50HZ,3 phase |
| Control System | PLC |
| | Weight | About 3 tons |
| | Way Of Drive | 1 inch single chain |
| | Size of machine | Length 5500mm* Width 600mm*Height 800m |
Main Components
| 3 ton de-coiler | 1 set |
| Main roll forming machine | 1 set |
| Punching device | 1 set |
| Cutting device | 2 sets |
| PLC Control box | 1 unit |
| Hydraulic station | 1 unit |
| Output table | 2 units |
| Safety cover | 1 unit(Optional) |
Application pictures
