Jiangyin Dingbo Technology Co., Ltd
Jiangyin Dingbo Technology Co.Ltd. Professional in manufacturing roll forming machine
Add to Cart
Corrugared Two Layer Sheet Metal Roll Forming Machines with Coining Process
Roll Forming Machine Introduction
Wuxi Shenghong Machinery colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table.
Roll Forming Machine Working Flow:
Decoiling the Sheet→Sheet Guiding→Film Covering→Roll Forming→Measure Lengh → Cutting the sheet→sheet to the Supporter.
Tile Roll Forming Machine Technical Parameters
| 1)Material Spec: | colored and galvanized steel sheet at yield stress 33 KSI; |
| 2)Thickness of Coil Sheet: | 0.5 --0.6 mm |
| 3)Coil Width: | 1000mm |
| 4)Working Speed: | 2.0 ~ 3.0 m/min. (step distance at 380mm,) |
| 5)Power Requirement: | main motor power 7.5 kw |
| 6)Hydraulic Station Power: | 5.5 kw |
| 7)Passive Uncoiler: | max. Capacity 5000kgs |
| 8)Quantity of Stands: | 15 groups or according to profiles |
| 9)Controlling System: | PLC |
| 10)Type of Cutting: | roll-formed and length-set cutting |
| 11)Machine Dimension: | about 18500×1500×1400mm |
| 12)Total Weight: | about 9500kg |
| 13)Voltage: | 380V 3 phase 60Hz or at buyer's requirement |
Roll Forming Machine Machine Features
1. Precise forming
2. High-solid forming stand guarantees the good and uniform high quality of final products
3. The operation automatically minimizes the tolerance of cutting length.
Products Features:
1. A stylish and attractive design,giving the apperance of a traditional roof tile.
2. Resistant to frost,heat,hail and gales;100% waterproof, due to the lateral run-off channel on each sheet for several models.
3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory.
3. Material of Main Equipment
| Roller Material | High grade No.45 forged steel, coated with hard chrome. |
| Active Shaft Material | High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft. |
| Electric Elements | PLC control panel, transducer imported from Mitsubishi of Japan. Other elements are from famous suppliers of China. |
| Cutter blades | Cr12 mould steel with quenched treatment. |
Machinery Shows
Workshop Show